The Frain Group
Your source for Used Packaging Equipment and Processing Machinery
Search for Used Packaging Equipment / Processing Machinery:
Advanced Search
New Arrivals!
Over 6,500 Pre-Owned Packaging & Processing
Machines Available for 2 Day Shipping!

R23281-Accutek automatic, inline, 6-head, stainless steel, pressure gravity, overflow filler capable of speeds up to 60 containers per minute. Container and fill size range: 2oz -1 gallon, and can handle ridged plastic, metal, and glass containers, etc.


5D9946-Adco semi-automatic, stainless steel, horizontal, intermittent motion, hot melt glue, cartoner capable of up to 60 cartons per minute. Cartons: (1" - 12")L x (1" - 3")W x (5" - 12")D. Has 4-chain drive with 15" centers, 2 1/2"H lugs and a 160"L x 7 1/2"W product infeed conveyor.


PRODUCTS For a full list of Frain's product categories visit:

5D9957-Consolidated automatic, 4-head, rotary chuck-style capper capable of capping up to 120 containers per minute. Caps: up to 70mm. Containers: up to 4 1/2" diameter. Has 8" pitch, 100"L x 3 1/4"W tabletop conveyor, worm screw to star wheel in feed, star wheel discharge, four magnetic chucks, 14" diameter disc to transfer caps from chute to chuck.


5E0291-Multivac semi-automatic, intermittent motion, roll-stock form / fill / seal machine capable of 15 cycles per minute. Has a lower web width of 12.6'' or (320mm), top web width of 12'' or (305mm) and a 10.4'' or (260mm) cut off area with a maximum depth size of 130 mm. Unit has a gas flush, vacuum seal, has 3' 6" load area, uses guillotine and cross-cut knives.


Packaging Equipment



Complete Line

5E0366- Shanklin automatic L-Bar sealer, capable of speeds up to 25 ppm (depending on application). 15" W x 21" L x 4" H hot knife seal area with a maximum film width of 24". Has a 33" L x 16" W plastic product infeed, and a 16"W x 28" L plastic discharge conveyor.


R23401-Lee 50 gallon, 316 stainless steel, tri-mixing kettle. 29" diameter x 30" deep, dome top with bridge mounted side and bottom scrape agitation, with high shear homoginizing head, and a top mounted prop style dissolver mixer. Has a bolt down cover with hydraulic tilt out.


Case Packers




R23391-Video Jet stainless steel, ink jet coder capable of speeds up to 123 ft / min. Unit can do single, 7 x 9 matrix or double 5 x 7 matrix lines, with character size from .11" (2.8mm) to .25" (3.8mm). Unit has a 20 character, four line digital display, 80 alphanumeric moisture resistant keyboard and 12 ft vinyl printhead cable and is mounted on (4) legs stand. BRAND NEW !!


R23312-Sergeant semi automatic combination L bar sealer and shrink tunnel capable of 15cpm. Unit has a 20"L x 14"W seal area and can handle packages up to 7"H. Unit has a 15"W x 8"H aperture and a 20"L shrink tunnel. Unit has adjustable seal dwell, heat tunnel and conveyor controllers and perf wheels.




Sealing Equipment

Shrink Equipment

6M1351-Davis Engineering automatic sleever capable of up to 200 sleeves per minute. Max product dimensions: 10"(L) x 6"(W) x 5 1/2"(H). 6"(W) conveyor has lugs on 10 1/2" centers and twin worm screw infeed. Unit has extended magazine with power conveyor and a 5 position rotary vacuum pick and place which transports sleeve blanks over top of product as it is being conveyed.


5E0372-Doboy automatic servo driven horizontal wrapper capable of speeds up to 350 PPM. Product size range: (length) 4" to 14-7/8" x (width) 1/2" to 7" and up to 3-3/4" (height). Equipped with 10' lugged infeed set on 8-1/2" centers, dual web arbors with power feed, a 7" wide by 2" high two-up seal jaw (1" header seal w/hole punch) and a max web width of 22".



Processing Equipment


Coating Pans

5E0336-West automatic, aluminum "Flip Off" capper capable of up to 120 cpm. 12 pocket starwheel product infeed with a (5' L x 2" W) stainless steel mesh conveyor. Unit has a cap size range of: (11mm - 28 mm) and bottle size range of: (13mm - 203mm).


5E0322-Filamatic closed environment 6 head, inline, S/S piston filler with 450 ml pistons, rated up to 180 cpm. Equipped with 12' long by 2-1/2" wide product conveyor, nozzle centering guides, bottom up fill and micrometer fill drip controls. Capable of hot fills up to 200 Deg F. Maximum fill capacity of 560ml with proper pistons.






Call Frain Today For A Quote!
For More Inventory Visit

Just a reminder we've moved! Our new address is:

9377 W Grand Avenue Franklin Park, IL 60131

Would You Like To Be Removed
From Future Emails?

send an email with the word "REMOVE" in the subject to